High Tensile, Metal Replacement-Grade, Glass-Filled Polymers

FLANGELESS LOOPTOGGLE – A Revolution in Heavy Duty Hollow Wall Fixings

Grapplefix designs heavy duty plasterboard and hollow wall fixings in the UK.

Professional-Series – engineered performance

Breakthrough design – no more retaining collars or oversized holes

Patented compressible cap allows fixtures to finish flush on final tightening and laminate directly with the board or tile for extra strength

New market leading performance in all thicknesses of plasterboard, especially high load, double-board applications
Optimised across a broad range of loading dynamics (shear, shear/cantilever, cantilever/tensile and tensile)

ALL SUBSTRATES including all thicknesses of plasterboard (9.5, 12.5, 15 mm) & double boards (25 or 30 mm)

All panel thicknesses down to 9 mm. Tiles OK – no side cuts/tile saw required. Compressible (hinged) cap prevents spinning
Ø14 mm drill hole – small enough to drill in all substrates

Half the surface area of a 20 mm hole, critical for plasterboard strength & integrity (optimal 4:1 backplate to hole DIA. @ 56 mm)
UNIVERSAL – ALL panel types – ONE FIXING

Plasterboard, Wallboard, Fibreboard, Fibreglass, OSB, MDF, Chipboard, Plywood (8.5 mm minimum), Steel & Plastic Panels, Hollow Blocks
NO GAPS – flush finish – patented FLANGELESS cap

Up to now collared retaining flanges have created a barrier between the fixture and the panel surface. This is problematic on harder surfaces as the fragile plastic flange disintegrates over time due to pressure & vibration, leading to loosening of the fixture. The gap is also highly undesirable both cosmetically and structurally. The flange creates a high pressure point on the surface of the substrate damaging softer surfaces

Pre-installs without the bolt. Reuse in same hole – change fixture anytime
No setting tool required – all in one solution
Easy failsafe installation – takes seconds – no spinning guaranteed
No moving parts – HEAVY DUTY. Moving parts = early failure under load/over time
Rated 04 or class 8 nuts – no thread creep or pull-away with unpredictable self tappers